How to create a news, specials and events articles on NBS

Product News

Quick Release Tent Mount Kit-TBMK008

Category: Front Runner Accessories
  • Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top Simply release the tabs on the 4 latches and lift the tent away in seconds.
  • No more wrenching in tight spaces during the “off-season” or time consumingweekday removal of a roof top
  • This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.
  • Works with the Roof Top Tentand other popular soft shell tent brands like TJM, ARB, Tepui, etc.
  • Works with hard shell tents such as Autohome/Maggionlina, and James Baroud. Hard shelltent owners please read *IMPORTANT NOTE below.
  • 4 low profile base brackets are bolted to a Front Runner Rack while 4 self- aligning bushes are secured to the tent base channels using the supplied plates.
  • Two of the latches securely lock with a key while the other 2 latching brackets feature a safety catch.
  • Comes with 4 keys for locking brackets.
  • Tents can be mounted at two different heights, depending on clearance needs. The bottom of the tent can sit either 40mm / 1.57 inches or 17mm / 1 inch above the rack slats.
  • Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
  • The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available
  • No tent modification required.
  • Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
  • Supplied with all required mounting hardware and a special installation tool.
  • Fitting instructions are included.


*IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use – Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent.

Specifications:

Consists of:
1 x Set of 4 Quick Release Brackets
2 x Locking Brackets (Left and Right Hand Side)
2 x Keys per lock
1 x Special Installation Tool
Installation Hardware
Fitting Instructions

Materials used:
Black powder coated 3CR12 stainless steel
316 Stainless steel
304 Stainless steel

Product Dimensions: (Per assembled bracket)
263mm (10.4") L x 93mm (3.7") W x 93mm (3.7") H

Weight:
4.8kg (10.6lbs)

Download Installation Manual - 1.4MB

Front Runner
011 466 0155
If you are interested in this please use this enquiry form powered by CaravanParks.com.

You must have javascript and cookies enabled to use this form

Step 1: Choose A Province
Select the province from where you would like to find dealers.
Step 2: Choose One Or More Dealers
Check the dealers that you would like to send your enquiry to.

Step 3: Enter your details and send a message





If you can see the following field please leave it blank
Send me a copy of this email

Accessories Brands

Camp Aid Range
Front Runner Range
GO Outdoorz Range
Leisureland Products Range
Nautical Sports Range
Snappy Chef Range
Snomaster Range
The Outdoor Innovation Company Range
Thule Range

Front Runner Accessories

Download your FREE digital Camp and Live Guide or Kamp en Leef Gids here!
close [X]
Stay home and stay safe, visit the official website: sacoronavirus.co.za